Finish Treatments
Though some people paint decks with deck paint, most choose to take advantage of the natural beauty of expensive decking woods by applying a clear or lightly stained finish. If you do choose to paint, use a stain-blocking oil or alkyd primer first.
In general, the best finishes are those that soak into the wood, not those that provide a surface film. A heavily pigmented, solid stain isn’t really recommended for decking because it shows wear patterns and may tend to peel. You want something that really soaks in.
There are three important characteristics to look for in a finish.
- First, the finish should be water repellent or waterproof, not just water resistant.
- Second, it should offer UV (ultraviolet) protection.
- Third, if mildew is a potential problem, the finish should contain a mildewcide, which a wood preservative. Regular preservatives should be reapplied once a year; newer and better “toner” products offer more UV protection and may last up to four years.
Whatever product you choose, read the label to be sure it’s right for your deck. Buy quality materials and follow the manufacturer’s directions for application.
Transparent Deck Stain:
- A specialized blend of natural oils coupled with silicone to provide superior protection on horizontal surfaces. Product also supports a two year warranty.
By saturating the surface of the lumber, the Wood Defender® product penetrates into the substrate leaving the fence with an even, uniform coating.
Some of the materials include:
- High quality, deep penetrating natural oils used to replenish and revive the composition of the wood
- Highest quality trans-oxide and finely ground iron oxide pigments that lessen the damaging affect of harsh UV rays while providing ample color choices for consumers
- UV inhibitors to further lessen the effects of harmful UV rays and keep the color consistent through the duration of the warranty
- Synthetic resins designed to promote maximum adhesion and penetration to the wood while beautifying the finished appearance of the wood structure
- The latest available mildewcides and fungicides to repel the growth of harmful mildew and fungus spores that decay wood and turn the fence gray in appearance
- Water-repellent silicone to repel water, decreasing the damage associated with warping, swelling and cupping
- Unique dispersants and anti-settling agents used to keep the product consistent in its container and lessen the amount of stirring required prior to application
No back brushing is required. The products are superior to competitive products that leave runs, drips and an uneven appearance.
The fact that this product is so easy to apply coupled with the fact that it wipes off most non-porous surfaces makes it the contractors’ choice.
Wood Defender™ Deck Stains
Transparent Deck Stains Designed Specifically For Decks
Of the thousands of decks built on an annual basis, the vast majority go unprotected against the environment. Due to the difficulty associated with applying competitor’s deck stains, consumers unfortunately watch their investment gray over time and ultimately deteriorate. This problem has been solved with the Wood Defender line of stains. With the ease of application, cleanup, maintenance and longevity Wood Defender Deck Stain has become the contractor’s choice for deck care!
Wood Defender Deck Stains are designed specifically for application on decks. Most competitors’ products are universal, being used for both fences and decks. A universal product commonly lacks specific criteria for its intended purpose.
Wood Defender stains help to beautify outdoor decks, playground equipment, and contact type structures. The unique formula highlights and reveals all of the existing wood grain. The formula works to seal out the harsh effects of the environment. The average life of Wood Defender stains on a properly treated project is 2-3 years.
Wood Defender Transparent Deck Stains
Wood Defender Transparent Deck Stains are formulated for ease of application and re-coats while offering extended protection for decks. The deep penetrating oil formula utilizes a unique blend of oils, resins, bio protection and finely ground trans-oxide pigmentation. The combinations of ingredients are applied at 150 square foot per gallon to saturate the wood with protection, unlike competitive products that lay on the surface of the wood. This principle allows for lasting protection and easy re-coats.
